Kinerja Susut Pada Blok Beton Sandwich Dengan Isian Styrofoam

Natalia Desi Ratnawati, Irviana Dyah Permatasari, Rr.M.I Rretno Susilorini, David Widianto

Abstract


Shringkage is a volume change unrelated to the load, where the volume of concrete is reduced
due to reduced water content due to hydration or evaporation or evaporation. The objective of
this research is to obtain the shrink parameter on sandwich block with Styrofoam stuffing in
the form of visual, damage, saturated and shrinkage in the medium of marine and freshwater
soak for 28 days and get the graph between time and depreciation. This research uses two
experimental method that is by way of oven and not dioven in fresh water and marine water
immersion media, each of which is submerged media in the form of 5 pieces of specimen length
37 cm, width 15,5 cm, and thickness 7.5 cm which if in total amounted to 10 concrete blocks,
the concrete block is tested in laboratory materials Soegijapranata Unika by using the
container as a medium of immersion media and the length of the sorong as a tool length, width,
thickness of the block and the scale that has a precision of 0.1 for get the weight of the concrete
then if it gets the result will result in the amount of shrinkage. The results obtained from the
shrinkage will be concluded whether the sandwich panel with Styrofoam stuffing can be used
as a bearing wall.

Keywords


Shrinkage; Concrete; Sandwich Concrete; Styrofoam

Full Text:

PDF

References


Bachar, S. (2017). Laporan Hasil Pemeriksaan Air. Semarang: Dinas Kesehatan - Balai Laboratorium Kesehatan dan Pengujian Alat Kesehatan.

Corral Higeura, e. a. (2011). Sulfate Attack and Reinforcement Corrosion in Concrete with Recycled Concrete Aggregates and Supplementary Cementing Materials. International Journal of Electrochemichal Science , 613-621.

Fianca, Dan,. (2015). Studi Eksperimen Material GRC (Glassfiber Reinforced Concrete)Sebagai Bahan Dasar Pada Modular Floating Pontoon . Jurnal Teknik Perkapalan, Vol 3.No 4

Firdaus. (2013). Perilaku Elemen Beton Sandwich Terhadap Pengujian Geser Murni. Konferensi Nasional Teknik Sipil 7 (hal. 39-46). Surakarta: Universitas Sebelas Maret.

Soandrijanie L, J. (2011). Pengaruh Styrofoam Terhadap Stabilitasdan Nilai Medan: Seminar Nasional-1BMPTTSSI - Konteks 5.

Nasional, B. S. (2013). Persyaratan Beton Struktural Untuk Bangunan Gedung. BSNI .

Nasional, B. S. (1991). Spesifikasi Agregat Ringan untuk Beton Struktur. Standart Nasional Indonesia 03 - 2461 - 1991 . BSNI.

Nasional, B. S. (2002). Tata Cara Perhitungan Struktur Beton Untuk Bangunan Gedung. Jakarta: http://tekniksipil.usu.ac.id/images/PD F/2002-12-SNI-03-2847-2002- Beton.pdf.

Siswanto, M.Fauzi (1990). Susut Beton. Media Teknik.

Susilorini dan Widianto. (2017). “Inovasi Teknologi Beton Sandwich dengan Isian Styrofoam”. Semarang: Universitas Katolik Soegijapranata




DOI: https://doi.org/10.24167/gs.v1i2.1259

Refbacks

  • There are currently no refbacks.


View My Stats